-- ==========================================
-- 1. 统一配置表 (仅保留有效数据)
-- ==========================================
local Config = {
    ["libanogs.so"] = {
        {0x1E67F8, "~A8 NOP"},
        {0x3E4694, "~A8 LDRB W11, [X1]"},
        {0x21308C, "~A8 MOV W0, #0x1"},
        {0x213F88, "~A8 NOP"},
        {0x2CA7C4, "~A8 NOP"},
        {0x22EBD0, "~A8 RET"},
        {0x3dd60c, "~A8 RET"},
        {0x31DCFC, "~A8 NOP"},
        {0x3304B8, "~A8 NOP"},
        {0x3386C4, "~A8 NOP"},
        {0x362A00, "~A8 NOP"},
        {0x37C958, "~A8 NOP"},
        {0x39F56C, "~A8 MOV X0, XZR"},
        {0x39F570, "~A8 RET"},
        {0x3AFF1C, "~A8 NOP"},
        {0x31DE74, "~A8 MOVz W9, #0x0"},
        {0x31F110, "~A8 MOVz W0, #0x0"},
        {0x37F82C, "~A8 MOVz W0, #0x0"},
        {0x431D14, "~A8 MOVz W0, #0x0"},
        {0x3A8DC0, "~A8 MOV W2, WZR"},
        {0x41AD48, "~A8 MOV W9, WZR"},
        {0x37FD78, "~A8 RET"},
        {0x382768, "~A8 RET"},
        {0x430370, "~A8 RET"},
        {0x437694, "~A8 RET"},
        {0x439FF8, "~A8 RET"},
        {0x47E34C, "~A8 RET"},
        {0x49AA48, "~A8 LDRB W9, [X0]"},
        {0x49ABE4, "~A8 LDRB W10, [X19]"},
        {0x4D8B6C, "~A8 RET"},
        {0x4D8C0C, "~A8 RET"},
        {0x4B3560, "~A8 MOV W0, #0x1"}
    },
    ["libUE4.so"] = {
        {0x5D2C10C, "~A8 RET"},
        {0x6048218, "~A8 RET"},
        {0x635F59C, "~A8 RET"}
    },
    ["libanort.so"] = {
        {0xA52E4, "~A8 MOV X0, XZR"},
        {0xA52E8, "~A8 RET"},
        {0x115E60, "~A8 LDRB W11, [X0]"},
        {0x122E90, "~A8 MOV X0, XZR"},
        {0x122E94, "~A8 RET"}
    }
}

-- ==========================================
-- 2. 平铺直叙式极速修改逻辑 (已修复 for 循环语法)
-- ==========================================
for soName, patchData in pairs(Config) do
    -- 1. 获取当前so的基址
    local base = nil
    local maps = gg.getRangesList(soName)
    for _, m in ipairs(maps) do
        if m.type:sub(2, 2) == 'w' or m.type:sub(1, 1) == 'r' then
            base = m.start
            break
        end
    end

    -- 2. 找到基址则批量写入
    if base then
        local list = {}
        for i, data in ipairs(patchData) do
            list[i] = {
                address = base + data[1],
                flags = 4,
                value = data[2]
            }
        end
        gg.setValues(list)
        gg.addListItems(list) 
    else
        gg.toast("未找到模块: " .. soName)
    end
end

gg.toast("所有有效功能已全部秒开！")